Random # 252: 1980 Toyota Corona

This ostensibly stock 1980 Corona is a good pairing with last post's LT Celica, as both cars would've almost certainly have been on Hobart Toyota franchise Co-Op Motors' floor at almost exactly the same time, with each of them baring BK rego plates within 195 digits of each other.

They're also both exceptionally good examples of their respective models, with the car shown here featuring very straight, rust-free panels, unblemished chrome and a lovely interior.

Its only apparent modification - one that suits it very well, it must be said - are its slightly dished Bathurst Globe style wheels and low-profile tyres.

As a sedan, this Corona was Australian-made - or at least assembled - and would be fitted with the Starfire 4 engine, as shared with Holden's deservedly much-maligned Sunbird and four-cylinder Commodore ranges, plus a four-speed gearbox.

The rarer, fully imported Corona lift-back of the same era, on the other hand, was equipped with the same four-cylinder engine and five-speed box that the Celica featured in Random # 251 had fitted.

U M P H

(uppermiddlepetrolhead.blogspot.com.au.)

All iPhone images.

Comments

EJ or EH Holden? (Up-dated December, 2022)

EJ or the later EH? Several years ago, I posed the question: Can somebody please explain the difference between an EJ and an EH Holden ute or van? The response at the time wasn't overwhelming, so I did a bit of Googling and ferreting through my photos and came up with my own rough guide to EJ and EH identification. Sedans and wagons are easy to tell apart ; the EH's vertical rectangular tail lights are a dead give-away. However, the workhorse versions of both models share the rear-end treatment of the earlier EJ, making it harder to identify one from the other. No super obvious hints here. Or here ... . It turns out that the main clues are in the placement of the front H O L D E N lettering and GMH lion emblems, the style of the radiator grille and the width of the vents in front of the windscreen, with all EJs - sedans, wagons, utes and vans - having one combination and the EH line-up having their own . So what exactly are those diffe

Vick Auto Prima Fiat X1/9 Brakes: An Owner’s Assessment

At the end of 2022, I fitted a set of Vick Autosport Prima front brakes to my mildly worked 1.5 litre Series 1 Fiat X1/9 . I was fortunate, having picked them up at a very, very reasonable price, brand new but surplus to the needs of a fellow X1/9 Australia member who had imported them from the US. The kit included: New single pot callipers , new vented rotors (standard X1/9 front rotors are smaller, non-vented items), DOT approved stainless steel brake hoses, and all the necessary mounting hardware. They are a value proposition, being particularly well priced compared to other manufacturers’ packages - even at RRP - with everyone I’ve spoken to saying they’re made to a high standard, too. Here's a link to a piece that I wrote about them at that time, including some costings: https://uppermiddlepetrolhead.blogspot.com/2022/11/the-x19-gets-prima-brake-upgrade.html . Initial Assessment: I was a little underwhelmed by the brakes' performance, finding that although they had a tiny

Random # 301: Nanna-Spec KE36 Corolla

Once upon a time - six or seven years ago, actually - there was a lovely pale yellow GC Galant station wagon getting around Hobart. It was totally nanna-spec; its paint was umarked, the chrome work and hubcaps were immaculate, and its very original interior was pristine. Then someone stuck feathers in its dashboard. Next, the windows were adorned with Tibetan prayer flags. And a hubcap went missing. And the the rear bumper was pushed in, mangling the bodywork behind it. And a mudguard got dented. And rust set in. I fear for this sweet, innocent KE36 Corolla. Somebody please save it before it's too late. Nanna needs you to do it. U M P H (uppermiddlepetrolhead.blogspot.com.au.) Photos by GlamRock.

Upper Middle Petrol Head:

Search This Blog